You've signed in with a UCLA undergraduate student account.
Sign in features are only available for UCLA graduate students at this time.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Manufacturing and Design.
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
Students must select a minimum of six courses from the following:
MAE 166C, MAE 168, MAE 171B, MAE 262, MAE CM280A, MAE 295C, MAE 296A, MAE 296B, MAE 297
Electives: The remaining courses may be selected from the courses offered by the Department of Mechanical and Aerospace Engineering. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Comprehensive Examination Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Integrated Circuits
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
Students must select a minimum of six courses from the following:
EE 201A, EE 201C, EE 215A, EE 215B, EE 215C, EE 215D, EE 215E, EE 216B, EE M216A, EE 209AS
Electives: The remaining courses may be selected from the above or from the Department of Electrical Engineering. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Comprehensive Examination Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Electronic Materials
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
At least 6 of the courses must be from the following:
MSE 122, MSE 221, MSE 223, MSE 224, MSE 252, MSE 271, MSE 298
Electives: The remaining courses may be selected from the Department of Materials Science and Engineering or the Department of Mechanical and Aerospace Engineering. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Comprehensive Examination Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Electrical
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
At least 6 of the courses must be from the Department of Electrical and Computer Engineering:
113, 131A, 132B, 201A, 201C, 205A, 209AS, 210A, M214A, 215A, 215B, 215C, 215D, 215E, M216A, 216B, 218, 230A, 231A, 231E, 232B, 238, 230B
Electives: The remaining courses may be selected from the above or from the Department of Electrical and Computer Engineering or the Department of Computer Science. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Capstone Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Computer Networking
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
Students must select a minimum of six courses from the following:
Breath Requirements: CS 111, CS 112, CS 118
(Can waived if taken as an undergraduate, i.e. you may select alternative courses)
Required Graduate Courses: CS 211, CS 236, CS 213B, CS 217A
Elective Courses: EE 131A, EE 132B, EE 230B, EE 231E
Electives: The remaining courses may be selected from the above or from the Departments of Computer Science or Electrical Engineering. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Comprehensive Examination Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2015-2016 academic year.
Henry Samueli School of Engineering and Applied Science
The School of Engineering and Applied Science offers the Master of Engineering (M.Engr.) degree (through the Engineering Executive Program), the Master of Science (M.S.) degree in Engineering (an online degree program), and the Engineering (Engr.) degree as schoolwide degrees.
The Engineering Executive Program, leading to the M.Engr. degree, is not currently accepting applications.
The Engineer degree represents considerable advanced training and competence in the engineering field, but does not require the research effort involved in a Ph.D. dissertation. The Engineer (Engr.) degree may be taken by a student at a level equivalent to completion of preliminaries in the Ph.D. program.
Engineering Schoolwide Graduate Program-General Information
For information about degree programs in specific engineering majors, applicants should consult the program requirements for that major.
Advising
Each student in this program is assigned an adviser by the Engineering Online Department. New students should contact the school’s student affairs officer and the faculty adviser on notification of admission.
Continuing students are expected to remain in contact with the faculty adviser and the student affairs officer. Based on the quarterly transcripts, student records are reviewed at the end of each quarter by the student affairs officer and the Associate Dean for Academic and Student Affairs. Special attention is given if students were admitted provisionally or are on probation. If their progress is unsatisfactory, students are informed of this in writing by the Associate Dean for Academic and Student Affairs.
Students are strongly urged to consult with the Office of Academic and Student Affairs regarding procedures, requirements and implementation of policies. In particular, advice should be sought on advancement to candidacy for the M.S. degree.
Areas of Study
Aerospace
Foreign Language Requirement
None.
Course Requirements
At least nine courses are required (36 units), of which at least five must be graduate courses at the 200 level (excluding the ENGR 299 Capstone Project course), and meet the comprehensive exam requirement.
Students must select a minimum of six courses from the following:
MAE 150B, MAE 154B, MAE 171B, MAE 250C, MAE 250D, MAE 269A, MAE 269D, MAE 270A, MAE 270B, MAE 271A
Electives: The remaining courses may be selected from the Department of Mechanical and Aerospace Engineering. Courses from other departments may be used with approval of the area director.
Teaching Experience
Not required.
Field Experience
Not required.
Comprehensive Examination Plan
Students can meet the Comprehensive Exam Requirement in two ways:
Choose (1 option below)
Option 1:
Take and pass the ENGR 299 Capstone Project course.
Option 2:
Take and pass three written exams for three different graduate level courses within the student’s area of specialization. The written exams are held concurrently with the final exam of the graduate level courses. Students may select which exams they would like to count towards the comprehensive exam requirement.
Thesis Plan
None.
Time-to-Degree
Students are expected to complete the degree within two academic years and one quarter, including two summer sessions. The maximum time allowed in this program is three academic years (nine quarters), excluding summer sessions.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| MS | 8 | 9 | 9 |
University Policy
A student who fails to meet the above requirements may be recommended for termination of graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing termination of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A recommendation for termination is reviewed by the school’s Associate Dean for Academic and Student Affairs.
Master’s
In addition to the standard reasons noted above, a student may be recommended for termination for
(1) Failure to maintain a grade point average of 3.0 in all courses and in those in the 200 series.
(2) Failure to maintain a grade point average of 3.0 in any two consecutive terms.
(3) Failure of the comprehensive examination.
(4) Failure to complete the thesis to the satisfaction of the committee members.
(5) Failure to maintain satisfactory progress toward the degree within the three-year time limit for completing all degree requirements.
Applicable only to students admitted during the 2022-2023 academic year.
College of Letters and Science
The Department of Statistics offers the Master of Applied Statistics (M.A.S.), Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Statistics.
Advising
The Director of the Master of Applied Statistics program is a regular Statistics faculty member who heads a committee of faculty members who may serve as academic advisers. The research interests of the members of this committee span most of the major areas of statistics. Each student chooses a primary consulting academic adviser who is responsible for monitoring the student’s degree progress and approving the study list each quarter. All students work with their primary consulting academic adviser in the first quarter of their second year to adopt a plan for degree completion. Advising and mentoring is done by the primary consulting adviser, who may either serve as a master’s committee member or also chair the student’s master’s thesis committee. Students meet with their primary thesis adviser monthly until the degree is completed, to ensure that students are assigned to and working on a thesis project that allows for timely completion of the degree. If the primary consulting adviser changes at any time during the course of the thesis, the student will need to report their new primary adviser to the department’s graduate Student Affairs Officer.
Areas of Study
The strengths of current and prospective faculty dictate the specific fields of emphasis in the department.
Foreign Language Requirement
None.
Course Requirements
M.A.S. students must earn 44 units of 400-level course credit. The Master of Applied Statistics program has a set of seven required core courses (28 units). In addition, students choose four electives (16 units) of 400 level courses that emphasize statistical modeling and programming. A written thesis is the final requirement. All students must maintain an overall grade-point average of 3.0 or better; and all students must take all core and elective courses for letter grade only.
The core consists of seven courses in statistical theory and methods. Courses are currently offered only once per year, and so students are encouraged to meet with their adviser to plan their graduation pathway.
Core Courses
The core consists of the following seven courses in statistical theory and methods.
400 Introduction to Probability Models
401 Survey of Methods in Modern Statistics
402 Applied Regression
403 Mathematical Statistics
404 Statistical Computing and Programming
405 Data Management
421B Advanced Statistical Communication
Among the core courses, only 401 may be waived upon departmental approval. If 401 is waived, the student must complete an additional elective course to satisfy the 44 unit requirement.
Elective Courses
In addition to the seven core courses, students must complete four courses (16 units) of their choosing as electives. Electives must be Statistics 400-level courses that emphasize statistical modeling and programming. 498 Master’s Thesis Research courses may not count as an elective. Only 4 units of Stats 497 (Individual Studies) may count towards the required electives. 4 units of Stats 496 (Statistics Internship) may also count towards the required electives upon approval of the M.A.S. Director.
Each elective course is 4 units.
Teaching Experience
Not required.
Field Experience
Not required. However, students will be encouraged to participate in internships with industry partners. Students may, if they wish, earn up to 4 units of course credit for their internship by enrolling in Stats 496 (Statistics Internship) and writing a substantial paper relating to or arising from the internship. This paper must be closely supervised by a faculty adviser.
Capstone Plan
This plan is not available to Master of Applied Statistics.
Thesis Plan
Every master’s degree thesis plan requires the completion of an approved thesis that demonstrates the student’s ability to perform original, independent research.
Students must find a thesis adviser, who approves the topic and form of the thesis. Students must nominate a thesis committee comprised of at least three faculty members, with at least two of whom are eligible to serve on thesis committees, and one of whom may be their adviser. The committee must be appointed by the Graduate Division. The final thesis must be approved by the thesis committee.
Each student’s thesis reports on research and analysis done under the supervision of both a faculty member who serves as the thesis adviser and an industry partner when available. While students may work with proprietary data, industry partners must agree that the student can publish and distribute the thesis. The thesis must consist of an original analysis that solves a real-world problem. The thesis adviser of the Department of Statistics supervises the thesis project to ensure the statistical integrity of the analysis. Thesis topics may originate from industry partners who propose topics and provide data sets. In these cases, a representative of the industry partner works with the student and the thesis adviser to ensure that the solution provided in the thesis is satisfactory to the industry partner. Students are expected to choose a thesis adviser and thesis topic by their fourth quarter of study in the program.
Time-to-Degree
Students must complete the requirements for the Master of Applied Statistics, including the written thesis, within 10 academic quarters. The standard time for most students will be 6 academic quarters.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| M.A.S. | 6 | 6 | 10 |
Academic Disqualification and Appeal of Disqualification
University Policy
A student who fails to meet the above requirements may be recommended for academic disqualification from graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing academic disqualification of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A student who does not complete all the requirements for the M.A.S. degree within 10 quarters is subject to a recommendation for academic disqualification. The graduate vice chair decides in each case whether a recommendation for academic disqualification is warranted. A student may appeal a recommendation for academic disqualification to the Graduate Studies Committee, which makes the final departmental decision.
Applicable only to students admitted during the 2023-2024 academic year.
College of Letters and Science
The Department of Statistics and Data Science offers the Master of Applied Statistics and Data Science (M.A.S.D.S.), Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Statistics.
Advising
The Director of the Master of Applied Statistics and Data Science program is a regular Statistics faculty member who heads a committee of faculty members who may serve as academic advisers. The research interests of the members of this committee span most of the major areas of statistics. Each student chooses a primary consulting academic adviser who is responsible for monitoring the student’s degree progress and approving the study list each quarter. All students work with their primary consulting academic adviser in the first quarter of their second year to adopt a plan for degree completion. Advising and mentoring is done by the primary consulting adviser, who may either serve as a master’s committee member or also chair the student’s master’s thesis committee. Students meet with their primary thesis adviser monthly until the degree is completed, to ensure that students are assigned to and working on a thesis project that allows for timely completion of the degree. If the primary consulting adviser changes at any time during the course of the thesis, the student will need to report their new primary adviser to the department’s graduate Student Services Adviser.
Areas of Study
The strengths of current and prospective faculty dictate the specific fields of emphasis in the department.
Foreign Language Requirement
None.
Course Requirements
M.A.S.D.S. students must earn 44 units of 400-level course credit. The Master of Applied Statistics and Data Science program has a set of seven required core courses (28 units). In addition, students choose four electives (16 units) of 400 level courses that emphasize statistical modeling and programming. A written thesis is the final requirement. All students must maintain an overall grade-point average of 3.0 or better; and all students must take all core and elective courses for letter grade only.
The core consists of seven courses in statistical theory and methods. Courses are currently offered only once per year, and so students are encouraged to meet with their adviser to plan their graduation pathway.
Core Courses
The core consists of the following seven courses in statistical theory and methods.
400 Introduction to Probability Models
401 Survey of Methods in Modern Statistics
402 Applied Regression
403 Mathematical Statistics
404 Statistical Computing and Programming
405 Data Management
421B Advanced Statistical Communication
Among the core courses, a course may be waived by request if the Director determines the student has already completed equivalent coursework. A maximum of 3 core courses may be waived. The Director with consultation from the MASDS governance committee will review student transcripts, syllabi, and other relevant materials to evaluate whether or not the student has already learned the bulk of the material taught in the courses. For a waiver to be considered, the prior coursework taken would need to be equivalent to the graduate level. For every course waived, the student must complete additional elective courses to satisfy the 44 unit requirement.
Elective Courses
In addition to the seven core courses, students must complete four courses (16 units) of their choosing as electives. Electives must be Statistics 400-level courses that emphasize statistical modeling and programming. 498 Master’s Thesis Research courses may not count as an elective. Only 4 units of Stats 497 (Individual Studies) may count towards the required electives. 4 units of Stats 496 (Statistics Internship) may also count towards the required electives upon approval of the M.A.S.D.S. Director.
Each elective course is 4 units.
Teaching Experience
Not required.
Field Experience
Not required. However, students will be encouraged to participate in internships with industry partners. Students may, if they wish, earn up to 4 units of course credit for their internship by enrolling in Stats 496 (Statistics Internship) and writing a substantial paper relating to or arising from the internship. This paper must be closely supervised by a faculty adviser.
Capstone Plan
This plan is not available to Master of Applied Statistics and Data Science.
Thesis Plan
Every master’s degree thesis plan requires the completion of an approved thesis that demonstrates the student’s ability to perform original, independent research.
Students must find a thesis adviser, who approves the topic and form of the thesis. Students must nominate a thesis committee comprised of at least three faculty members, with at least two of whom are eligible to serve on thesis committees, and one of whom may be their adviser. The committee must be appointed by the Graduate Division. The final thesis must be approved by the thesis committee.
Each student’s thesis reports on research and analysis done under the supervision of both a faculty member who serves as the thesis adviser and an industry partner when available. While students may work with proprietary data, industry partners must agree that the student can publish and distribute the thesis. The thesis must consist of an original analysis that solves a real-world problem. The thesis adviser of the Department of Statistics and Data Science supervises the thesis project to ensure the statistical integrity of the analysis. Thesis topics may originate from industry partners who propose topics and provide data sets. In these cases, a representative of the industry partner works with the student and the thesis adviser to ensure that the solution provided in the thesis is satisfactory to the industry partner. Students are expected to choose a thesis adviser and thesis topic by their fourth quarter of study in the program.
Time-to-Degree
Students must complete the requirements for the Master of Applied Statistics and Data Science, including the written thesis, within 10 academic quarters. The standard time for most students will be 6 academic quarters.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| M.A.S.D.S. | 6 | 6 | 10 |
Academic Disqualification and Appeal of Disqualification
University Policy
A student who fails to meet the above requirements may be recommended for academic disqualification from graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing academic disqualification of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A student who does not complete all the requirements for the M.A.S.D.S. degree within 10 quarters is subject to a recommendation for academic disqualification. The graduate vice chair decides in each case whether a recommendation for academic disqualification is warranted. A student may appeal a recommendation for academic disqualification to the Graduate Studies Committee, which makes the final departmental decision.
Applicable only to students admitted during the 2024-2025 academic year.
College of Letters and Science
The Department of Statistics and Data Science offers the Master of Applied Statistics and Data Science (M.A.S.D.S.), Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Statistics.
Advising
The Director of the Master of Applied Statistics and Data Science program is a regular Statistics faculty member who heads a committee of faculty members who may serve as academic advisers. The research interests of the members of this committee span most of the major areas of statistics. Each student chooses a primary consulting academic adviser who is responsible for monitoring the student’s degree progress and approving the study list each quarter. All students work with their primary consulting academic adviser in the first quarter of their second year to adopt a plan for degree completion. Advising and mentoring is done by the primary consulting adviser, who may either serve as a master’s committee member or also chair the student’s master’s thesis committee. Students meet with their primary thesis adviser monthly until the degree is completed, to ensure that students are assigned to and working on a thesis project that allows for timely completion of the degree. If the primary consulting adviser changes at any time during the course of the thesis, the student will need to report their new primary adviser to the department’s graduate Student Services Adviser.
Areas of Study
The strengths of current and prospective faculty dictate the specific fields of emphasis in the department.
Foreign Language Requirement
None.
Course Requirements
M.A.S.D.S. students must earn 44 units of 400-level course credit. The Master of Applied Statistics and Data Science program has a set of seven required core courses (28 units). In addition, students choose four electives (16 units) of 400 level courses that emphasize statistical modeling and programming. A written thesis is the final requirement. All students must maintain an overall grade-point average of 3.0 or better; and all students must take all core and elective courses for letter grade only.
The core consists of seven courses in statistical theory and methods. Courses are currently offered only once per year, and so students are encouraged to meet with their adviser to plan their graduation pathway.
Core Courses
The core consists of the following seven courses in statistical theory and methods.
400 Introduction to Probability Models
401 Survey of Methods in Modern Statistics
402 Applied Regression
403 Mathematical Statistics
404 Statistical Computing and Programming
405 Data Management
421B Advanced Statistical Communication
Among the core courses, a course may be waived by request if the Director determines the student has already completed equivalent coursework. A maximum of 3 core courses may be waived. The Director with consultation from the MASDS governance committee will review student transcripts, syllabi, and other relevant materials to evaluate whether or not the student has already learned the bulk of the material taught in the courses. For a waiver to be considered, the prior coursework taken would need to be equivalent to the graduate level. For every course waived, the student must complete additional elective courses to satisfy the 44 unit requirement.
Elective Courses
In addition to the seven core courses, students must complete four courses (16 units) of their choosing as electives. Electives must be Statistics 400-level courses that emphasize statistical modeling and programming. 498 Master’s Thesis Research courses may not count as an elective. Only 4 units of Stats 497 (Individual Studies) may count towards the required electives. 4 units of Stats 496 (Statistics Internship) may also count towards the required electives upon approval of the M.A.S.D.S. Director.
Each elective course is 4 units.
Teaching Experience
Not required.
Field Experience
Not required. However, students will be encouraged to participate in internships with industry partners. Students may, if they wish, earn up to 4 units of course credit for their internship by enrolling in Stats 496 (Statistics Internship) and writing a substantial paper relating to or arising from the internship. This paper must be closely supervised by a faculty adviser.
Capstone Plan
This plan is not available to Master of Applied Statistics and Data Science.
Thesis Plan
Every master’s degree thesis plan requires the completion of an approved thesis that demonstrates the student’s ability to perform original, independent research.
Students must find a thesis adviser, who approves the topic and form of the thesis. Students must nominate a thesis committee comprised of at least three faculty members, with at least two of whom are eligible to serve on thesis committees, and one of whom may be their adviser. The committee must be appointed by the Graduate Division. The final thesis must be approved by the thesis committee.
Each student’s thesis reports on research and analysis done under the supervision of both a faculty member who serves as the thesis adviser and an industry partner when available. While students may work with proprietary data, industry partners must agree that the student can publish and distribute the thesis. The thesis must consist of an original analysis that solves a real-world problem. The thesis adviser of the Department of Statistics and Data Science supervises the thesis project to ensure the statistical integrity of the analysis. Thesis topics may originate from industry partners who propose topics and provide data sets. In these cases, a representative of the industry partner works with the student and the thesis adviser to ensure that the solution provided in the thesis is satisfactory to the industry partner. Students are expected to choose a thesis adviser and thesis topic by their fourth quarter of study in the program.
Time-to-Degree
Students must complete the requirements for the Master of Applied Statistics and Data Science, including the written thesis, within 10 academic quarters. The standard time for most students will be 6 academic quarters.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| M.A.S.D.S. | 6 | 6 | 10 |
Academic Disqualification and Appeal of Disqualification
University Policy
A student who fails to meet the above requirements may be recommended for academic disqualification from graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing academic disqualification of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A student who does not complete all the requirements for the M.A.S.D.S. degree within 10 quarters is subject to a recommendation for academic disqualification. The graduate vice chair decides in each case whether a recommendation for academic disqualification is warranted. A student may appeal a recommendation for academic disqualification to the Graduate Studies Committee, which makes the final departmental decision.
Applicable only to students admitted during the 2025-2026 academic year.
College of Letters and Science
The Department of Statistics and Data Science offers the Master of Applied Statistics and Data Science (M.A.S.D.S.), Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) degrees in Statistics.
Advising
The Director of the Master of Applied Statistics and Data Science program is a regular Statistics faculty member who heads a committee of faculty members who may serve as academic advisers. The research interests of the members of this committee span most of the major areas of statistics. Each student chooses a primary consulting academic adviser who is responsible for monitoring the student’s degree progress and approving the study list each quarter. All students work with their primary consulting academic adviser in the first quarter of their second year to adopt a plan for degree completion. Advising and mentoring is done by the primary consulting adviser, who may either serve as a master’s committee member or also chair the student’s master’s thesis committee. Students meet with their primary thesis adviser monthly until the degree is completed, to ensure that students are assigned to and working on a thesis project that allows for timely completion of the degree. If the primary consulting adviser changes at any time during the course of the thesis, the student will need to report their new primary adviser to the department’s graduate Student Services Adviser.
Areas of Study
The strengths of current and prospective faculty dictate the specific fields of emphasis in the department.
Foreign Language Requirement
None.
Course Requirements
MASDS students must earn 44 units of 400-level course credit. The Master of Applied Statistics and Data Science program has a set of seven required core courses (28 units). In addition, students choose four electives (16 units) of 400-level courses that emphasize statistical modeling and programming. M.A.S.D.S. students may take UCLA Statistics 200-level courses with restrictions (see * below) and subject to the instructor’s permission.
A written thesis is the final requirement. All students must maintain an overall grade-point average of 3.0 or better; and all students must take all core and elective courses for letter grade only.
The core consists of seven courses in statistical theory and methods. Courses are currently offered only once per year, and so students are encouraged to meet with their adviser to plan their graduation pathway.
Core Courses
The core consists of the following seven courses in statistical theory and methods.
400 Introduction to Probability Models
401 Survey of Methods in Modern Statistics
402 Applied Regression
403 Mathematical Statistics
404 Statistical Computing and Programming
405 Data Management
421B Advanced Statistical Communication
Among the core courses, a course may be waived by request if the Director determines the student has already completed equivalent coursework. A maximum of three core courses may be waived. The Director, with consultation from the M.A.S.D.S. governance committee, will review student transcripts, syllabi, and other relevant materials to evaluate whether or not the student has already learned the bulk of the material taught in the courses. For a waiver to be considered, the prior coursework taken would need to be equivalent to the graduate level. For every course waived, the student must complete additional elective courses to satisfy the 44 unit requirement.
Elective Courses
In addition to the seven core courses, students must complete four courses (16 units) of their choosing as electives. Electives must be Statistics 400-level courses or the 200-level courses specified in restriction 2. 498 Master’s Thesis Research courses may not count as an elective. Only four units of Stats 497 (Individual Studies) may count towards the required electives. Four units of Stats 496 (Statistics Internship) may also count towards the required electives upon approval of the M.A.S.D.S. Director.
Each elective course is four units.
*Restrictions to taking 200-level courses:
——————————-
211 Topics in econ and machine learning (similar to 425)
231a Pattern recognition and machine learning (similar to 413)
240 Multivariate analysis (similar to 411)
256 Causality (similar to 420)
C161/261 Introduction to Pattern Recognition and Machine Learning (similar to 414)
Teaching Experience
Not required.
Field Experience
Not required. However, students will be encouraged to participate in internships with industry partners. Students may, if they wish, earn up to 4 units of course credit for their internship by enrolling in Stats 496 (Statistics Internship) and writing a substantial paper relating to or arising from the internship. This paper must be closely supervised by a faculty adviser.
Capstone Plan
This plan is not available to Master of Applied Statistics and Data Science.
Thesis Plan
Every master’s degree thesis plan requires the completion of an approved thesis that demonstrates the student’s ability to perform original, independent research.
Students must find a thesis adviser, who approves the topic and form of the thesis. Students must nominate a thesis committee comprised of at least three faculty members, with at least two of whom are eligible to serve on thesis committees, and one of whom may be their adviser. The committee must be appointed by the Graduate Division. The final thesis must be approved by the thesis committee.
Each student’s thesis reports on research and analysis done under the supervision of both a faculty member who serves as the thesis adviser and an industry partner when available. While students may work with proprietary data, industry partners must agree that the student can publish and distribute the thesis. The thesis must consist of an original analysis that solves a real-world problem. The thesis adviser of the Department of Statistics and Data Science supervises the thesis project to ensure the statistical integrity of the analysis. Thesis topics may originate from industry partners who propose topics and provide data sets. In these cases, a representative of the industry partner works with the student and the thesis adviser to ensure that the solution provided in the thesis is satisfactory to the industry partner. Students are expected to choose a thesis adviser and thesis topic by their fourth quarter of study in the program.
Time-to-Degree
Students must complete the requirements for the Master of Applied Statistics and Data Science, including the written thesis, within 10 academic quarters. The standard time for most students will be 6 academic quarters.
| DEGREE | NORMATIVE TIME TO ATC (Quarters) | NORMATIVE TTD |
MAXIMUM TTD |
| M.A.S.D.S. | 6 | 6 | 10 |
Academic Disqualification and Appeal of Disqualification
University Policy
A student who fails to meet the above requirements may be recommended for academic disqualification from graduate study. A graduate student may be disqualified from continuing in the graduate program for a variety of reasons. The most common is failure to maintain the minimum cumulative grade point average (3.00) required by the Academic Senate to remain in good standing (some programs require a higher grade point average). Other examples include failure of examinations, lack of timely progress toward the degree and poor performance in core courses. Probationary students (those with cumulative grade point averages below 3.00) are subject to immediate dismissal upon the recommendation of their department. University guidelines governing academic disqualification of graduate students, including the appeal procedure, are outlined in Standards and Procedures for Graduate Study at UCLA.
Special Departmental or Program Policy
A student who does not complete all the requirements for the M.A.S.D.S. degree within 10 quarters is subject to a recommendation for academic disqualification. The graduate vice chair decides in each case whether a recommendation for academic disqualification is warranted. A student may appeal a recommendation for academic disqualification to the Graduate Studies Committee, which makes the final departmental decision.